Reference image. Final construction follows the confirmed model and quotation.
Magnetic Pumps
CQB-G High-Temperature Insulated Magnetic Pump
Model: CQB-G
CQB-G High-Temperature Insulated Magnetic Pump is an industrial magnetic pump supported by DFIN Pump for model verification, material selection and technical review based on the actual medium and duty point.
TECHNICAL DATA
Specifications, performance and construction
Confirm the final operating point, materials, motor and connection standard before ordering.
Product Overview
CQB-G High-Temperature Insulated Magnetic Pump is an industrial magnetic pump selected for chemical transfer and applications requiring improved liquid containment. The final configuration should be verified against the actual liquid, duty point, temperature, installation and power supply.
Typical Applications
Chemical transfer and applications requiring improved liquid containment.
Design Features
- Sealless magnetic coupling
- Corrosion-resistant material options
- Compact and low-maintenance construction
- Model and material selection supported by DFIN Pump engineers
Extracted Operating Data
- 1.6MPA， 100 ， 1600KG/M，
Values are reference data from the authorized source catalog. Confirm the selected model before ordering.
Technical Performance Data
| Type & nbsp; & nbsp; & nbsp; No. | Port Size |
Flow (m3/h) |
Head |
The gas-crushed food. |
Motor Power KW |
Speed (r/min) |
Voltage (V) |
|
| Inlet(mm) | Outlet(mm) | |||||||
| CQB32-20-125G | 32 | 20 | 3.2 | 20 | 4.5 | 1.5 | 2900 | 380 |
| CQB32-20-160G | 32 | 4.5 | 2.2 | 2900 | 380 | |||
| CQB40-25-125G | 40 | 25 | 6.3 | 20 | 4.5 | 2.2 | 2900 | 380 |
| CQB40-25-160G | 32 | 4.5 | 3 | 2900 | 380 | |||
| CQB40-25-200G | 50 | 4.5 | 5.5 | 2900 | 380 | |||
| CQB50-32-125G | 50 | 32 | 12.5 | 20 | 4.0 | 3 | 2900 | 380 |
| CQB50-32-160G | 32 | 4.0 | 4 | 2900 | 380 | |||
| CQB50-32-200G | 50 | 4.0 | 7.5 | 2900 | 380 | |||
| CQB50-32-250G | 80 | 4.0 | 15 | 2900 | 380 | |||
| CQB65-50-125G | 65 | 50 | 25 | 20 | 4.0 | 5.5 | 2900 | 380 |
| CQB65-50-160G | 32 | 4.0 | 7.5 | 2900 | 380 | |||
| CQB65-40-200G | 40 | 50 | 4.0 | 15 | 2900 | 380 | ||
| CQB65-40-250G | 80 | 4.0 | 22 | 2900 | 380 | |||
| CQB80-65-125G | 80 | 65 | 50 | 20 | 3.5 | 7.5 | 2900 | 380 |
| CQB80-65-160G | 32 | 3.5 | 15 | 2900 | 380 | |||
| CQB80-50-200G | 50 | 50 | 3.5 | 22 | 2900 | 380 | ||
| CQB80-50-250G | 80 | 3.5 | 37 | 2900 | 380 | |||
| CQB100-80-125G | 100 | 80 | 100 | 20 | 3.2 | 15 | 2900 | 380 |
| CQB100-80-160G | 32 | 3.2 | 22 | 2900 | 380 | |||
| CQB100-65-200G | 65 | 50 | 3.2 | 37 | 2900 | 380 | ||
| CQB100-65-250G | 80 | 3.2 | 55 | 2900 | 380 | |||
|
Fault phenomena |
Reason analysis |
Troubleshooting |
|
The pump does not produce water |
& nbsp; 1, & nbsp; water pumps invert 2, leaking in pipes 3, insufficient water for pump cavity 4, Voltage Too High, Slippering on Starter 5, Service Lift too high 6, valve not opened |
& nbsp; 1, & nbsp; re-directing Motor rotation 2 Emission Elimination & nbsp; 3, & nbsp; increase water storage & nbsp; 4, & nbsp; adjust Voltage 5, reduced pump installation position & nbsp; 6, & nbsp; fix or change valves |
|
Insufficient Flow |
& nbsp; 1, & nbsp; the size of the inhaler routing or congestion & nbsp; 2, & nbsp; leaf rotation route block 3, Head Too High & nbsp; 4, Speed is not enough |
& nbsp; 1, & nbsp; switch or wash into the pipe & nbsp; 2, & nbsp; Cleaning of Leaf Wheels & nbsp; 3, & nbsp; open water valves & nbsp; 4, & nbsp; restoration rating |
|
Head too low |
& nbsp; 1, & nbsp; Flow is too big & nbsp; 2, Sped Too Low |
& nbsp; 1, & nbsp; Small discharge valves & nbsp; 2, & nbsp; restoration rating |
|
The bath sound is too loud |
& nbsp; 1, & nbsp; Pumps Axes Severe wear 2, Severe wear and tear on bearings & nbsp; 3, & nbsp; external or internal magnets in contact with the separator & nbsp; 4, & nbsp; Seal rings and leaf wheel grinding & nbsp; 5, & nbsp; Rolling axis wear in cooler |
& nbsp; 1, & nbsp; replacement pump axle & nbsp; 2, & nbsp; replacement bearings & nbsp; 3, & nbsp; remove pump head reassembly & nbsp; 4, & nbsp; replacement of detonating rings, sealing rings & nbsp; 5, & nbsp; replace scroll bearings |
|
Leakage |
Damage to 1, O seal |
& nbsp; 1, & nbsp; replace O-sealed |
Selection Information Required
Please provide medium, concentration, flow, total head or pressure, temperature, viscosity or solids, voltage, frequency and installation method. DFIN Pump will confirm the suitable model and materials.
Catalog reference: authorized YZJ product data · Model CQB-G
SELECTION SUPPORT
Application-based pump selection
Send the liquid, flow, head or pressure, temperature, solids, installation, power supply and destination for a verified recommendation.
Discuss this application